| Product |
Structure |
Printing / Coating |
Illustration of anti mold |
OK
anti
mold ecochip
 |
|
|
|
Exclusive high-tech
paper development.
Patented high-tech paper
which is not obtainable by
other supplier.
|
|
 |
|
|
|
| |
UV Printing
The printing ink is fixed by the
ultraviolet lamp.
No color migration and no
damage
to merchandise.
Must be printed by special equipment with high cost, so it is difficult to become a counterfeit target. |
|
|
|
|
|
| |
Dual action anti mold effects
1ST：
Decompose microorganisms
in a prompt way.
2ND：
Slowly release potent anti
mold
factors to inhibit mold
growth.
Anti mold factors won’t be release
in a short time, so merchandise
can be packed unhurriedly. |
|
|
|
Anti mold sticker |
| |
Normal adhesive paper
Easily obtainable by paper supplier.
The glue layer with liner
of normal adhesive paper in high temperature is easily melted.
Anti mold with glue can damage the merchandise.
|
|
| |
Normal printing
Print by basic equipment and can have color migration.
Normal paper with normal printing is easy to become a counterfeit target because of cheap costing production. |
|
| |
Effect of single way
Only have effect in a single way, anti mold effect will be release immediately
in a short time.
Workers have to properly alignment the sticker and pack the merchandise
in a hurry.
During shipment in humid container.
The sticker with less anti mold effect
that will prevent mold growth or not is
a big question. |
|
Anti mold
LDPE |
| |
Low Density Polyethylene (LDPE) + twin adhesive
DPE in high temperature the glue of twin adhesive would easily melt and damage the merchandise.
|
|
|
| |
Dyed LDPE
Dirty the merchandise easily..
Obtained easily, lots of counterfeit. |
|
| |
Start to volatilize the anti mold effect
from solid state by high humidity.
( Reacts on 80% relative
humidity level )
When humidity in environment is high,
mold grows at the same time.
Anti mold starts to take effect after mold/mildew growth that won’t have any effect to prevent mold/mildew growth.
Besides, anti mold effect volatilize from solid state is hard to spread
the effect in contain space.
|
|
Transparent PET film
+
Drops
|
| |
PET + DROPS
It has to assist by DROPS to
use on paper mass.
It is inconvenient, waste paper mass and environment -unfriendly.
|
|
|
| |
Printing between twin transparent films.
|
|
|
| |
PET has no capillary, so it contains
few anti mold effect.
That’s why it has to use together
with DROPS to have any effect. |
|
Silica Gel |
| |
Made synthetically from
sodium silicate.
|
|
| |
It has no anti mold effect but absorb water only. Some manufacturer has added preservative on the outer bag
for anti mold purpose.
|
|
|
| |
Absorb water only.
When Silica Gel is saturated with water,
it won’t work anymore.
|
|
|
