EZPIN CO., LTD. - OK anti-mold ecochip


			Products

			Products Efficacy

			Product Features & Comparison

			How to use

			Product Verification

			Preventives

			Q & A

Although OK anti mold ecochip is a highly effective anti mold product but your merchandise, your products may be
moldy when the environment in the work place does not have proper installation.

1 /

Plastics、PVC、PU floor

Aqueous vapor come from surrounding air, closing of windows to prevent the outside aqueous vapor.
But also have large amount of aqueous vapor comes from the floor.

We suggest the factories laying PVC/ PU floor to take preventives measures in work place in order to isolate the
aqueous vapor from floor.

2 /

During high humidity season, relative humidity often exceeds 80%, it is advisable to use the

dehumidifier in the storage space, but please note the following main points:

	Dehumidifier through the principle of heat exchanges makes the moisture condensed then transform into the water. If the bucket of water is filled, the water will evaporate in high temperature. In order for the dehumidifier to work effectively, filled water must be poured out frequently, or connect water pipe to discharge outdoors.
	Dehumidification functions of the air conditioner. Besides using the dehumidifier, we recommend the air conditioner dehumidification function.Because cool functions of the air conditioner, the moisture will not evaporate in the air and could reduce the moisture condensation.
	The principle of the air conditioner is similar to dehumidifier, it can dehumidify and discharge the moisture outdoors directly then creating a dry space.

3 /

Moisture proof for paper boxes and wrapping paper

Paper boxes and wrapping paper easily absorb moist.
We suggest it to be stored in moisture-proof space.

4 /

Storage during less rainy season.

The storage environment could kept open for good air circulation, It can prevent aqueous vapor from gathering and by doing so it will not cause sultry. It will save cost for using dehumidifier and air conditioner.

5 /

The factories preventives measure on the environment as follows :

	Factory should be kept clean and dry. The environment relative humidity to be control under 60~70%.
	For leathers and cartons, the relative humidity should be control under than 8%.
	Factory walls and floors should dry and no sign of mildew.
	Materials should be stored in dry and clean area.
	Storages goods shouldn’t be piled up tightly. They should be separated properly.
	Storage goods shouldn’t be put on the ground but on pallets.
	Do not use water diluted later for laminating.
	Do not use contaminated latex.
	Do not apply water to shoes after heat setting.
	When using water based wax and top spray observe expiry dates.
	Keep products dry before packing.
	Check that the boxes for packing are dry.
	Productions materials should be dry when delivered.
	Products should not be warm when packing.
	Place an OK anti mold ecochip during final packing.
	Use 2 or more OK anti mold ecochip during high humidity months.
	Shipping Containers should be inspected for no bad odor, no leaks and the floor is dry.

Home │About Us │ Products │ Hot News │ Contact Us